Ashly GQX-1502 Spécifications télécharger pdf (Page 5)

Operator Manual – GQX Series Equalizers Page - 5

GQX Equalizers

GQX equalizers use “Q” enhanced Wein bridge filters and interleaved summing for constant

“Q”, low ripple, and minimum filter interaction. A servo-balanced output stage simulates a

true transformer output to allow interfacing with virtually any type of load.

GQX equalizers have with three different connector types:

 1/4” inch stereo phone jacks

 Three pin XLR type connectors

 Euroblocks

These three connectors facilitate interfacing to most professional audio products. Inputs as

well as servo-balanced outputs can be used balanced or unbalanced

Connectors & Cables

Your GQX series equalizer is provided with three different connector types:

1. 1/4 inch stereo phone jacks (TRS)

2. Three pin XLR type connectors

3. Euroblock Connector

When possible, balanced connections are recommend between all components in your

system, as this eliminates ground-loop induced hum and noise.

GQX Connector Polarities

Unbalanced Connections and Grounding

If you must use unbalanced connectors, the negative lead of the connector should be tied to

the ground lead. Using unbalanced connections could result in chassis ground-loop noise.

Altering the signal/chassis ground relationship in equipment connected to your GQX unit

may eliminate the noise.

Safety Instructions – 3

Introduction - 4

GQX Equalizers – 5

Connectors & Cables – 5

Grounding

Physical Description - 6

Installation – 7

Typical Applications - 8

Troubleshooting - 9

Dimensions - 9

Specifications - 10

Warranty - 11

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Ashly GQX-1502 Spécifications Page 5